Acrylic paint is fast-drying paint containing pigment suspended in an acrylic polymer emulsion. Acrylic paints can be diluted with water, but become water-resistant when dry.

 History

Acrylics were first made commercially available in the 1950s. These were mineral spirit-based paints called Magna^- offered by Bocour Artist Colors. Water-based acrylic paints were subsequently sold as "latex" house paints, although acrylic dispersion uses no latex derived from a rubber tree. Interior "latex" house paints tend to be a combination of binder (sometimes acrylic, pva and others), filler, pigment and water. Exterior "latex" house paints may also be a "co-polymer" blend, but the very best exterior water-based paints are 100% acrylic. Soon after the water-based acrylic binders were introduced as house paints, artists (the first of whom were Mexican muralists) and companies alike began to explore the potential of the new binders. Water  soluble artist quality acrylic paints became commercially available in the early 1960s, offered by Liquitex.

 

 Differences between acrylic and oil paint

The main difference between acrylics and oil paints is the inherent drying time. Oils allow for more time to blend colors and apply even glazes over underpaintings. This slow drying aspect of oil can be seen as an advantage for certain techniques, but in other regards it impedes the artist trying to work quickly. The fast evaporation of water from the acrylic paint film can be slowed with the use of retarders. Retarders are generally glycol or glycerine based additives. In the case of acrylic paints, the addition of a retarder slows the evaporation rate of the water, and allows for more water to be added and the paint workable, until the retarder has left the film and the paint layer is dry.

Oil paints tend to require the addition of a toxic solvent, such as mineral spirits or turpentine to thin the paints and clean up tools, though relatively recently water soluble oil paints have been developed for artist use. Secondly, oil paint films become increasing yellow and brittle, and will lose their flexibility in a few decades.