|
|
|
|
How does it work? The paint flows through the paint tube to a tiny port at the edge of the roller and disc. Paint is drawn as the roller turns. A urethane foam roller is supported by two clear polyester Dura-Lar™ disks, a stainless steel spacer, that rotate on a stainless steel screw axel. Thickness and shape of roller is adjustable by turning screw to tighten, or out to soften edge. In sizes equal or smaller than N scale code 55 you will be using only the single .020" disk (the foam roller will be too thick). Finger tightened locknut secures your adjustment. O Scale paints exactly the same as the rest! The port for the paint is larger as is the foam roller. Cap can be simply immersed in a separate little jar with thinner for oil based enamels or water with dish detergent for acrylics to clean up. Remove to dry, then store for use again later! Here is a How-To video of the Rusty Rails Painter via You Tube. Today it has a brand new and improved design! Because this video is already placed and used on so many web sites we will leave it remain as is. Changing (updating) this video with a new one will lose the original code at You Tube and make it no longer a link and available at all our friend's web sites.
Z & N SCALES / HO SCALES / O SCALE
|
|
|